Balun

Size: 0605 to 2012
Working Frequency: 670 MHz to 5950 MHz
Insertion Loss(dB) : 0.55~ 2.0
Unbalanced Impedance (Ω) : 50/75
Balanced Impedance (Ω) : 35/ 37.5 / 50 / 75 / others

For more info > Balun product guide        Access Details and Data Sheet

Filter

Detailed information of Walsin Technology’s Filter is enclosed below for your reference. Or try our advanced search tool below.
For product catalog and ordering information, please download product catalog

Try our search tool and conduct product search by part number, characteristics, and series.

Advanced Search

Filter

0605 to 3225 Sizes
Working Frequency: DC to 5950 MHz
Insertion Loss(dB) : 0.25~ 4.5
Impedance (Ω) : 50 / 75

For more info >    Filter product guide      Access Details and Data Sheet

Coupler

Directional coupler is a passive component used for isolating, eliminating or combining signals in microwave signal routing and radio frequency. In consumer electronics, directional coupler is mainly used for power monitoring and other utilization. Walsin RFCPL Series supports for 699MHz to 5850MHz with 4 pins and 6 pins footprint design. Low Insertion loss with designated in-band coupling and directivity are sufficient for RF design.

Detailed information of Walsin Technology’s Coupler is enclosed below for your reference. Or try our advanced search tool below.

For product catalog and ordering information, please download product catalog

Try our search tool and conduct product search by part number, characteristics, and series.

Advanced Search

Coupler

Size: 0605 to 1608 ,
Working Frequency: 617 MHz to 2700 MHz
Insertion Loss(dB): 0.15 ~ 1.83

For more info >    Coupler product guide      Access Details and Data Sheet

SAW Filter

Detailed information of Walsin Technology’s SAW Filter is enclosed below for your reference. Or try our advanced search tool below.
For product catalog and ordering information, please download product catalog

Try our search tool and conduct product search by part number, characteristics, and series.

Advanced Search

Saw Filter

Fixed spec.
For GPS/LTE/WALAN use
Walsin offers following product types: Single Saw, Single Saw Diplexer, Single Saw Duplexer, and Balanced Saw Duplexer

For more info >    SAW filter product guide      Access Details and Data Sheet

Multiplexer

Detailed information of Walsin Technology’s Multiplexer is enclosed below for your reference. Or try our advanced search tool below.
For product catalog and ordering information, please download product catalog

Try our search tool and conduct product search by part number, characteristics, and series.

Advanced Search

Multiplexer

Diplexer –
Size: 1005 to 2520
Lower Working Frequency: 570 MHz to 2500 MHz
Higher Working Frequency: 1427 MHz to 5950 MHz
Insertion Loss(dB):0.35~2.7 Triplexer –
Size: 2012 to 2520
Lower Working Frequency: 698 MHz to 1606 MHz
Middle Working Frequency: 1710 MHz to 2500 MHz
Higher Working Frequency: 2500 MHz to 5950 MHz
Insertion Loss(dB) : 0.6~1.8

For more info >    Multiplexer product guide      Access Details and Data Sheet