鎃特企業有限公司專營被動元件，包括電容 / 電阻 / 薄膜產品 / 電感 / 安規保護元件 / RF濾波器 / 天線 / 模組 WALSIN 授權代理商，專營WALSIN、YAGEO、PDC、POE、KAMAYA、TAIYO YUDEN、samsung... 推廣AEC-Q200 車規產品：MLCC & CHIP-R
LOGO


服務項目

電容項目

電阻項目

電感項目

保護元件

天線模組

射頻濾波器

保護元件

鎃特企業提供完整的插件式圓板型陶瓷電容器組合以及晶片式保護元件，產品陣容包括符合安規的產品以及符合汽車用料規範AEC-Q200的產品。
分享到

 

鎃特企業秉持著誠信、品質、創新之經營理念為客戶服務。

鎃特與客戶及廠商間都擁有良好的配合默契，既使是面對初次接洽配合的客戶，鎃特也能迅速掌握客戶步調，依客戶的各種需求，量身訂做客制化服務。

鎃特企業提供完整的晶片電阻產品組合，以網通設備､移動通訊及照明設備等多種應用。

 

保護元件產品 - 

Class II HI-K

  • Capacitance Range : 100pF to 22000pF
  • Capacitance Tolerance : ±10%(for Y5P), ±20%(for ZSU), +80% -20%(for Z5U&Z5V&Y5V)
  • Operating Temperature Range : -25°C ~ +85°C (Y5P,Y5V) ; 10°C ~ +85°C (Z5U, Z5V)
  • Rated Voltage : 50,100, 500,1000,2000,3000VDC
  • Dissipation Factor(tan δ) : Y5P, Z5U tan δ ≤2.5%, Z5V, Y5V : tan δ ≤5.0%
  • Insulation Resistance(IR)@25°C : 10,000 MΩMinimum or 200 MΩμF whichever is smaller
  • Dielectric Strength : 50-500VDC: 2.5 times the rated WVDC, 1k, 2k, 3kVDC: 2 times the rated WVDC
  • Testing Parameters : 1KHz ±20%, 1.0Vrms±0.2Vrms

Data sheet

Class III SEMI-CONDUCTIVE

  • Capacitance Range : 100,000pF
  • Capacitance Tolerance : +80%-20%
  • Operating Temperature Range : -25°C ~ +85°C
  • Rated Voltage : 16,25 & 50 VDC
  • Dissipation Factor(tanδ) : Y5V 16V….. tan δ ≤7.5%, Y5V 25/50V….. tan δ ≤5.0%
  • Insulation Resistance(IR)@25°C : 16V ….. ..100MΩ Minimum or 10MΩμF 25/50V…1000MΩ Minimum or 20MΩμF
  • Dielectric Strength : 2 times the rated WVDC
  • Testing Parameters : 1KHz ±20%, 0.1Vrms Maximum

Data sheet

Low Disspation

  • Capacitance Range : 100pF to 4700pF
  • Capacitance Tolerance : ±10%
  • Operating Temperature Range : -25°C ~ +125°C
  • Rated Voltage : 1K, 2K, 3K VDC
  • Dissipation Factor(tan δ) : LR: tan δ≤0.2%
  • Insulation Resistance(IR)@25°C : 10000MΩ Minimum or 200MΩμF whichever is smaller (500VDC, 60sec)
  • Dielectric Strength : 2 times the rated WVDC
  • Testing Parameters : 1KHz ±20%, 1.0Vrms±0.2Vrms

Data sheet

Safety Certificated Caps X1/Y2_(AC series)

  • Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF
  • Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%
  • Operating Temperature Range : -40°C ~ +125°C
  • Temperature Coefficient(C Max) : -1000~+350ppml°C (SL). ±10%(Y5P), +30~80%(Y5V), +20~55% (Y5U)
  • Voltage Resistance :
  • AH Type: X1: 400Vac / Y1: 400Vac or 250Vac
  • AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac
  • AS Type: X1 : 760Vac / Y1 : 500Vac
  • Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC
  • @20°C, 1MHz, 1±0.2Vrms
  • Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms
  • Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms
  • Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms
  • Insulation Resistance : 10000MΩ @500VDC, 60sec
  • Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)
  • 2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)
  • 4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

Data sheet

Safety Certificated Caps X1/Y1_(AH series)

  • Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF
  • Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%
  • Operating Temperature Range : -40°C ~ +125°C
  • Temperature Coefficient(C Max) : -1000~+350ppml°C (SL). ±10%(Y5P), +30~80%(Y5V), +20~55% (Y5U)
  • Voltage Resistance :
  • AH Type: X1: 400Vac / Y1: 400Vac or 250Vac
  • AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac
  • AS Type: X1 : 760Vac / Y1 : 500Vac
  • Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC
  • @20°C, 1MHz, 1±0.2Vrms
  • Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms
  • Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms
  • Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms
  • Insulation Resistance : 10000MΩ @500VDC, 60sec
  • Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)
  • 2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)
  • 4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

Data sheet

Safety Certificated Caps X1/Y1_(AS series) 500Vac

  • Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF
  • Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%
  • Operating Temperature Range : -40°C ~ +125°C
  • Temperature Coefficient(C Max) : -1000~+350ppml°C (SL). ±10%(Y5P), +30~80%(Y5V), +20~55% (Y5U)
  • Voltage Resistance :
  • AH Type: X1: 400Vac / Y1: 400Vac or 250Vac
  • AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac
  • AS Type: X1 : 760Vac / Y1 : 500Vac
  • Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC
  • @20°C, 1MHz, 1±0.2Vrms
  • Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms
  • Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms
  • Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms
  • Insulation Resistance : 10000MΩ @500VDC, 60sec
  • Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)
  • 2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)
  • 4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

Data sheet

MONO CAP RD20

  • Capacitance Range : 1.0pF to 22μF
  • Capacitance Tolerance : Within the specified tolerance.
  • Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)
  • Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)
  • Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC
  • Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min
X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)
  • Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms
≤1000pF：1MHz±10% 1.0±0.2 Vrms
  • X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

Data sheet

MONO CAP RD21

  • Capacitance Range : 1.0pF to 22μF
  • Capacitance Tolerance : Within the specified tolerance.
  • Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)
  • Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)
  • Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC
  • Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min
X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)
  • Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms
≤1000pF：1MHz±10% 1.0±0.2 Vrms
  • X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

Data sheet

MONO CAP RD30

  • Capacitance Range : 1.0pF to 22μF
  • Capacitance Tolerance : Within the specified tolerance.
  • Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)
  • Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)
  • Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC
  • Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min
X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)
  • Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms
≤1000pF：1MHz±10% 1.0±0.2 Vrms
  • X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

Data sheet

MOV Varistors

Series of Walsin Technology’s MOV Varistors is enclosed below for your reference. Or try our advanced search tool below.
For product catalog and ordering information, please download product catalog

Try our search tool and conduct product search by part number, characteristics, and series.

Advanced Search

Standard (D Series)

  • Storage Temperature : -40°C to +125°C
  • Operating Ambient Temperature : -40°C to +125°C (without derating)
  • Maximum Voltage-Temperature Coefficient : < -0.05% / °C
  • Insulation Resistance : 1000 Mega-ohm minimum
  • Hi Pot (Leads To case, 1 Min.) : 2500 VDC
  • Typical Response Time : <25 Nano-seconds
 Epoxy Rating : 94V-0
 Current / Energy Derating (>85°C ) : -2.5% / °C
  • DC Leakage Current : 200μA maximum (at rated DC working voltage )
  • Solderability : MIL-STD-202F

Data sheet

High Energy (E Series)

  • Storage Temperature : -40°C to +125°C
  • Operating Ambient Temperature : -40°C to +125°C (without derating)
  • Maximum Voltage-Temperature Coefficient : < -0.05% / °C
  • Insulation Resistance : 1000 Mega-ohm minimum
  • Hi Pot (Leads To case, 1 Min.) : 2500 VDC
  • Typical Response Time : <25 Nano-seconds
 Epoxy Rating : 94V-0
 Current / Energy Derating (>85°C ) : -2.5% / °C
  • DC Leakage Current : 200μA maximum (at rated DC working voltage )
  • Solderability : MIL-STD-202F

Data sheet

Industrial

  • Storage Temperature : -40°C to +125°C
  • Operating Ambient Temperature : -40°C to +125°C (without derating)
  • Maximum Voltage-Temperature Coefficient : < -0.05% / °C
  • Insulation Resistance : 1000 Mega-ohm minimum
  • Hi Pot (Leads To case, 1 Min.) : 2500 VDC
  • Typical Response Time : <25 Nano-seconds
 Epoxy Rating : 94V-0
 Current / Energy Derating (>85°C ) : -2.5% / °C
  • DC Leakage Current : 200μA maximum (at rated DC working voltage )
  • Solderability : MIL-STD-202F

MLV Varistors

Series of Walsin Technology’s MLV Varistors is enclosed below for your reference. Or try our advanced search tool below.

Try our search tool and conduct product search by part number, characteristics, and series.

Advanced Search

Surge Protection(VZ Series)

Storage Temperature : -40°C to +125°C
Operating Temperature : -40°C to +125°C
Maximum Clamping voltage : 20Vc~270Vc@1 A, 8*20 us standard current.
Maximum Capacitance : 3.5pF~10500pF @ 1 KHz.

ESD Protection at Hi-Speed Application(VH Series)

Storage Temperature : -40°C to +125°C
Operating Temperature : -40°C to +125°C
Maximum Clamping voltage : 34Vc~240Vc@1A, 8*20 us standard current.
Maximum Capacitance : 0.8pF~100pF @ 1 MHz.